6W/9W/12W Recessed Led Downlights Dimmable Work with Alexa Echo Plus SmartThings

Description

Please kindly note that our zigbee devices(Zigbee/Plus/Pro version Products) require related zigbee gateways.
Zigbee series downlight has 6W/9W/12W to choose from.
The lense and the cover is IP44(waterproof rating), that can be used in bathroom, it's recommended that the lamp base must be hidden in the fixture.
Support Tuya App/SmartThings App control. Support APP smart life app control in Android/IOS Phone.
(There are some compatibility issues with IK*E*A at present)
Support voice control by Alexa Echo/Google Home via SmartThings hub or Tuya Zigbee hub.
Group: Creat Rooms, divide your lamps into one or several rooms, to control lamps in each room together or seperately.
Set the Scene, Scenes that automatically adjust to the lights in your room according to environment.
16 million colors for you to choose and make your life colorful, to create a relaxing and quiet atmosphere. Such as living room, kitchen, bedroom and so on.
Sync your light with movies, music, and games, enjoy the light effect which synchronizes with the plot of the picture immediately, and experience the more delicate atmosphere lighting effect.
How to sync? please follow thiswebsite:
http://www.screenbloom.com/
Sync Show results:
http://www.screenbloom.com
/
Q&A or more info, please contact us on line, and we will answer you in time.
Product Name:ZIGBEE RGB+CCT LED Downlight
Model No.:GL-D-003Z/004Z/005Z
Voltage: AC100-240V
Color Temperature: 2700-6500K
Luminous Efficiency: 90LM/W
CRI: >80
Operating Temperature:-20-60°C
1pcs*ZigBee RGB+CCT LED Downlight
1pcs* User Manual
In this manual we will explain the connection of wires and the connection with a ZigBee Light
Link Gateway.
These devices works with many ZigBee Light Link Gateways* like , Amazon Echo Plus.
Installation:
1.Turn off the Power.
2.Plug in the bulb.
3.Now you can connect it with the gateway.
Connection with Gateway:
1.Connect the LED product to the controller see section "Installation".
2.Start the device searching on the ZigBee Light Link Gateway, it could take some time.
If the Gateway does not find the device, plug power off/on or make a reset.
3.The Gateway found your device and you can assign it to the different
rooms/zones/groups.
4.Now you can use the device.
Reset:
1.Switch on your device.
2.Now switch off and on within 2 seconds.
3.Repeat off/on four times.
4.Reset is done when the device is switched on in the fifth time and the light stays on after
blinking 4 times